Gude DHH 1050/7 T MBS Bedienungsanleitung Seite 34

List of Contents
Chapter
1. Precautionary Instructions and Accident Prevention.................................................................................. 2
2. Technical Data............................................................................................................................................ 3
3. Maintenance and Routine Care.................................................................................................................. 3
4. Control Arms and Cleaving Cross Installation............................................................................................ 3
5. Area of Use................................................................................................................................................. 5
6. Operation.................................................................................................................................................... 5
7. Lift Setting................................................................................................................................................... 5
8. Hydraulics................................................................................................................................................... 6
9. Transport Directions ................................................................................................................................... 6
10. Warranty ..................................................................................................................................................... 6
11. Faults.......................................................................................................................................................... 6
12. Spare Parts Drawing for # 01954 .............................................................................................................. 7
13. List of Spare Parts # 01954....................................................................................................................... 8
Introduction
Dear Customer,
We strongly recommend that you become familiar with this operating instructions. It is in the interest of your health
that would be put at a risk unless your knowledge of this manual is profound. Presenting you this manual , we wish
that your work with the product you have purchased is made as easy as possible. It is necessary to observe the
instructions contained herein for the machine to work to your complete satisfaction. Our objective is to improve the
products continuously and for this reason, we reserve changes.
We urgently discourage you from putting the machine in operation without you
having got familiar with the contents of this manual!!
1. Precautionary Instructions and Accident Prevention
General
For technical and safety reasons, instructions contained in this manual and precautionary instructions on the
machine regarding operation, maintenance and repairs shall be observed unconditionally.
Operators
Any use of the cleaving machine may entail hazards. Therefore, only well-instructed and experienced
persons should be allowed to handle the machine and to work on it. Operators should be required to
wear tight-fitting clothes and protective shoes. No persons bellow 18 years of age should be allow to
work with the machine. It is permitted however, to have people above 16 yrs of age working with the
machine provided that it is necessary for educational reasons and professional supervision is guaranteed.
Working Area
It is an imperative for a safe cleaving job that the floor in the working area is flat and firm-based and sufficient
freedom of movement is secured. Ways for bringing and removing the machine in/from the area should be free
of any disturbances. Sufficient lighting should be provided in the working area.
Job Preparation
GÜDE cleaving machines are always delivered with hardened cleaving knives. However, light deformation of the
cleaving knife cutting edge may arise in result of cleaving wood with unexpected foreign bodies in it - concrete,
steel etc.- and whetting or filing must remove it . The knives sharpness maintenance will increase working
capacity.
TIP: Grease the cleaving knives every now and then (for problem wood) .
Safety devices (primarily two-lever control) must be checked on prior to being put in operation for
the first time and the function must be examined.
2
GB
Page