Emc / Technical Description; Emv/Technische Beschreibung; Compatibilité Électromagnétique/Description Technique; Emc/Descrizione Tecnica - Medela Swing Maxi Gebrauchsanweisung

13. EMC / Technical description

The Swing Maxi breastpump needs special precautions regarding EMC (Electromag-
netic compatibility) and needs to be installed and put into service according to the
EMC information provided in these instructions for use.
Wireless communications equipment such as wireless home network devices,
mobile phones, cordless telephones and their base stations, walkie-talkies can affect
the electric breastpump Swing Maxi and should be kept at least a distance 1.0 m
away from the equipment.
Electromagnetic Compatibility (EMC, IEC 60601-1-2:2007, Table 1)
Electromagnetic emissions
The electric breastpump Swing Maxi is intended for use in the electromagnetic environment
specified below. The customer or the user of the electric breastpump Swing Maxi should
assure that it is used in such an environment.
Emission tests
RF emissions
CISPR 11
RF emissions
CISPR 11
88
Harmonic emissions
IEC 61000­3­2
Voltage fluctuations /
flicker emissions
IEC 61000­3­3
a No significant voltage changes
Warning – The electric breastpump Swing Maxi should not be used adjacent
to or stacked with other equipment. If adjacent or stacked use is necessary,
the electric breastpump Swing Maxi should be observed to verify normal operation
in the configuration in which it will be used.
Electromagnetic environment –
Compliance
guidance
The electric breastpump Swing Maxi uses RF
energy only for its internal function. Therefore,
Group 1 its RF emissions are very low and are not likely
to cause any interference in nearby electronic
equipment.
Class B
The electric breastpump Swing Maxi is suitable
for use in all establishments, including domestic
Class A
establishments and those directly connected
to the public low-voltage power supply network
that supplies buildings used for domestic pur-
Not applica-
poses.
ble a