Service Data; Installation - AEG BE8615001 Benutzerinformation

32 www.aeg.com
Problem
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

13.2 Service data

If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

14.1 Building In
600
WARNING!
Refer to Safety chapters.
558
min. 550
20 16
min. 560
573
5
3
Possible cause
The demo mode is activa-
ted.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
548 21
114
589
594
594
Remedy
1. Deactivate the appli-
ance.
2. Touch and hold
the appliance activates
and deactivates.
3. Touch and hold
at the same time un-
til an acoustic signal
sounds. "Demo" goes
out.
min. 550
558
20 16
590
min. 560
573
5
3
until
and
548 21
114
589
594
594