Hdmi In : Connecting To An External Component With An Hdmi Cable; Connecting The Fm Antenna - Samsung HT-D6500 Bedienungsanleitung

Connections
HDMI OUT : Connecting to a TV with an HDMI Cable (BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your TV.
✎
NOTE

Certain HDMI output resolutions may not work, depending on your TV.

After making the video connection, set the Video input source on your TV to match the
corresponding Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.

If you have set the product's remote control to operate your TV, press the TV SOURCE button
on the remote control and select HDMI as the external source of the TV.

You must have an HDMI connection to enjoy videos with 3D technology.

A long HDMI cable may cause a screen noise. If this is the case, set Deep Colour to Off in the menu.

HDMI IN : Connecting to an External Component with an HDMI Cable

1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
2. Press the FUNCTION button to select H. IN1 or H. IN2 input.
The mode switches as follows : BD/DVD
HDMI Auto Detection Function
If you have connected your home cinema by HDMI cable, the home cinema's video output automatically
switches to the HDMI mode when you turn it on. For available HDMI video resolutions, see page 31.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of
the product.
FM Antenna (supplied)
FM ANT
22
English
HT-D6500_ELS_0315.indd 22 HT-D6500_ELS_0315.indd 22
D. IN

Connecting the FM Antenna

1.
2.
✎

WIR WIR
AUX R. IPOD W. IPOD
Connect the FM antenna supplied to the FM
ANTENNA Jack.
Slowly move the antenna wire around until you
fi nd a location where reception is good, then
fasten it to a wall or other rigid surface.
NOTE
This product does not receive AM broadcasts.
H. IN1 H. IN2 FM
2011-03-17 ¿ÀÈÄ 1:36:04 2011-03-17 ¿ÀÈÄ 1:36:04