Hdmi In : Connecting To An External Component With An Hdmi Cable - Samsung HT-D5500 Bedienungsanleitung

HDMI IN : Connecting to an External Component with an HDMI Cable

1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the
HDMI OUT jack on your digital device.
2. Press the FUNCTION button to select H. IN1 or H. IN2 input.
The mode switches as follows : BD/DVD
HDMI Auto Detection Function
If you have connected your home cinema by HDMI cable, the home cinema's video output
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,
see page 31.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of
the product.
HT-D5500_ELS_1226.indd 23 HT-D5500_ELS_1226.indd 23
D. IN AUX R. IPOD W. IPOD H. IN1 H. IN2 FM
23
English
2011-12-26 2011-12-26 1:24:01 1:24:01