Control Board - Futurelight PHS-750E Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, switch on and off the
lamp, run the pre-programmed program or make a reset.
The main menu is accessed by pressing Mode/Esc until the display is lit. Browse through the menu by
pressing Up or Down. Press Enter in order to select the desired menu. You can change the selection by
pressing Up or Down. Press Enter in order to confirm. You can leave every mode by pressing Mode/Esc-.
The functions provided are described in the following sections.
Default settings shaded.
Main menu
Set DMX address
Value display
Function
Set to Slave
Mode
Auto program
Music control
Time information
Sub menu
A001~ AXXX
PAN ...
Slave 1, Slave 2, Slave
3
Master/Alone
Master/Alone
Current time
Total run time
Total lamp time
Lamp off time
Clear lamp time
53/120
Display
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Individual fixture
XXXX (hours)
running time
XXXX (hours) Fixture running time
XXXX (hours) Lamp running time
XXXX (minutes) Lamp off time
ON/OFF Clear lamp time
00024321.DOC, Version 1.4
Function