Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EUROLITE IR-7 remote control
1
The device must be activated for remote control. For this, set menu item IR Setup to
On.
2
When actuating a button, always hold the remote control in the direction of the sensor.
There must be visual connection between the remote control and the sensor.
3
The remote control is supplied with a battery inserted. An insulating foil between the
battery and the battery contacts prevents the battery from being discharged during
storage. Prior to the first operation remove the foil from the battery support on the rear
side of the remote control. Otherwise operation of the remote control is not possible.
4
If the range of the remote control decreases (10 meters
as a maximum), replace the battery. For this purpose,
on the rear side of the remote control press the small
bar with the groove to the right and at the same time
remove the battery support. For operation, one 3 V button cell type CR 2025 is
required. When inserting, pay attention that the positive pole of the button cell shows upwards in the
support.
Danger of explosion when battery is replaced improperly. Only replace by the same type.
Please dispose of old and used batteries properly. Batteries are hazardous waste and should
Not all functions on the universal remote control are applicable to this device.
No.
Key
Function
1
BLACKOUT
2
STROBE
3
SPEED
4
SENSITIVITY
5
%
6
+/-
Function 1
...
7
AUTO
...
...
Function 1
...
8
SOUND
...
...
Function 1
...
9
FADE
...
...
Function 1
...
10
MANUAL
...
...
...
Function 1
11
R/G/B/A/UV/W
...
Function 1
12
Number:0-9
...
CAUTION!
not be disposed of with regular domestic waste!
Step 1
Step 2
BLACKOUT
any button
STROBE
+/-
SPEED
+/-
SENSITIVITY
+/-
%
+/-
AUTO/SOUND/
STOBE/
SPEED/
SENSITIVITY/%
+/-
/FADE/
MANUNAL/
/R/G/B/A/UV/W
AUTO
+/-
2
AUTO
SPEED
3
AUTO
STROBE
4
AUTO
%
SOUND
+/-
SENSITIVIT
2
SOUND
Y
3
SOUND
STROBE
4
SOUND
%
FADE
+/-
2
FADE
SPEED
3
FADE
STROBE
4
FADE
%
MANUAL
2
MANUAL
+/-
R/G/B/A/UV
3
MANUAL
/W
4
MANUAL
STROBE
5
MANUAL
%
R/G/B/A/UV/W
+/-
2
R/G/B/A/UV/W
STROBE
Number:0-9
2
Number:0-9
STROBE
Step 3
Description
Blackout
Strobe effect - available for the buttons
AUTO/SOUND/FADE/MANUAL/R/G/B/A/UV/W/0
- 9
Select the desired speed
Internal programs
Microphone sensitivity
Sound controlled mode
Dimmer -available for the buttons
AUTO/SOUND/
STROBE/FADE/MANUAL/R/G/B/A/UV/W/0 - 9
Increasing/Decreasing
Internal programms
+/-
Desired speed
+/-
Strobe effect
+/-
Dimmer
Sound controlled mode
+/-
Microphone sensitivity
+/-
Strobe effect
+/-
Dimmer
Fading
+/-
Desired speed
+/-
Strobe effect
+/-
Dimmer
R/G/B
Manual Setting R/G/B values
+/-
Dimmer intensity of LED colors
+/-
Strobe speed
+/-
Dimmer
Manual Setting R/G/B values
+/-
Dimmer intensity of LED colors R/G/B
Static colors
Strobe effect
30/35
00088051.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
