To Check The Phone-To-Pc Connection - LG -P920 Benutzerhandbuch

PC using a USB cable and click
"Next".
3 Enter the On-Screen Phone
password and click "Next". The
default password is "0000".
You can change the password
in Settings > Wireless &
Networks > On-Screen Phone
Settings.
4 Click "OK" to exit the window.
Go to Settings > SD card &
NOTE:
phone storage settings and make
sure that the "Mass storage only"
checkbox is deselected.
Wireless connection with
Bluetooth:
1 On your mobile phone, go
to Settings > Wireless &
Networks > Bluetooth settings.
Select Turn on Bluetooth and
then select Discoverable.
2 If you have previously connected
using a cable, run the New
Connection Wizard to create a
new connection.
3 Run the Connection Wizard on
the computer, select "Bluetooth
connection", then "Next".
4 The wizard will start searching
for Bluetooth-enabled mobile
phones. When the mobile phone
you want to connect to appears,
click "Stop" to stop searching.
5 Select "LG-P920" from the device
list and click "Next". You can
rename the device if you wish.
6 Enter the PIN code (e.g. "0000")
and click "Next".
7 On your mobile phone, accept the
request and enter the same PIN
code, then touch "OK".
8 Enter the On-Screen Phone
password and click "Next". (The
default password is "0000").
9 Touch "OK" to exit.
To check the phone-to-
PC connection
Once the devices have been
connected, drag down the notification
95