Herunterladen Inhalt Inhalt Diese Seite drucken

Technische Daten; Technical Data - Burmeier DALI II 24 Volt Gebrauchsanweisung

Pflegebett
Vorschau ausblenden Andere Handbücher für DALI II 24 Volt:
Inhaltsverzeichnis

Werbung

Kapitel 9
Chapter 9
AC 230 V, ± 10 %, 50 Hz
Aussetzbetrieb (AB) 2 min EIN /18 min AUS
G
P
EBRAUCHSANWEISUNG
FLEGEBETT

TECHNISCHE DATEN

ABMESSUNGEN UND GEWICHTE
Montiertes Bett mit Seitengittern:
200 x 90 cm
Liegefläche
212 x 101 cm
Außenmaße
93 ~ 97 kg
Gesamtgewicht, je nach Ausführung
185 kg
Sichere Arbeitslast
145 kg
Patientengewicht, max.
Zerlegtes Bett:
17 kg
Fahrgestell mit Motor
41 kg
Liegeflächenrahmen mit Motoren
13 kg
4 Seitengitterholme aus Holz
17,5 kg
4 Seitengitterholme aus Metall
5 kg
Aufrichter
3 kg
Lagerhilfe
BESONDERE MERKMALE
Elektrische Höhenverstellung der Liegefläche
von ca. 40 bis 80 cm.
Elektrische Verstellung der Rückenlehne von
0° bis ca. 70°.
Elektrische Verstellung der Beinlehne von 0°
bis ca. 35°.
Elektrische Schrägstellung der Liegefläche
zur Fußtieflage von ca. 10°.
Fahrbar durch vier Laufrollen, alle einzeln zu
bremsen.
Liegefläche 200 x 90 cm, viergeteilt; Außen-
maße ca. 212 x 101 cm.
Seitengitter beidseitig, absenkbar.
ELEKTRISCHE DATEN
Schaltnetzteil
Linak SMPS 4
Typ
Eingangsspannung
AC 0,8 A
max. Stromaufnahme
DC 24 V
Ausgangsspannung
max. DC 4,6 A
Ausgangsstrom
Einschaltdauer
Klassifikation, Schutzklasse II, Typ B, MPG
Eingruppierung Klasse I, nicht für Anwendung in
explosionsfähigen Atmosphären
DALI II 24 V
· I
M
OLT
NSTRUCTION
N
B
DALI II 24 V
ANUAL FOR
URSING
ED

TECHNICAL DATA

MEASUREMENTS AND
DIMENSIONS
Assembled bed with side rails:
Reclining surface
External dimensions
Total weight, depending on model
Safe load
Patient weight, max.
Disassembled bed:
Chassis complete incl. motor
Reclining surface frame with motors
4 side rail bars, wooden
4 side rail bars, iron
Trapeze pole
Storage aid
SPECIAL FEATURES
Electrical height adjustment of the reclining
surface from about 40 cm to 80 cm.
Electrical adjustment of the backrest from 0°
to about 70°.
Electrical adjustment of the leg rest from 0° to
about 35°.
Electrical inclination of the reclining surface to
the foot end from about 10°.
Driven with four individually-locking castors.
Reclining surface of 200 x 90 cm, divided into
four areas; Outside dimensions are about
212 x 101 cm.
Side rails on both sides can be lowered.
ELECTRICAL DATA
Transformer unit
Type
Input Voltage
Max Amps
Output Volts
Output Amps
Operating time
Classification, Protection class II, Type B, MPG
classification Class I, not for use in explosive
atmospheres.
OLT
47

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis