Source Menu; Other Features; Tv Status; Programme Swap - Metz 20 TM 52 Bedienungsanleitung

QTÃD†ÃSˆvt
Qyrh†rÃXhv‡
First of all choose the “Country” by using
“ ” or “ ” button.
To cancel Autostore before starting, press
“TV” button. To select “Continue” use “ ” or
“ ” button and press “ ” or “ ” button.
After Autostore is finalized, a programme list
will appear on the screen. In the programme
list you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and/or the
programme names of programmes, you
can change them in Programme menu.

Source Menu

You can switch your TV to AV modes by
pressing directly to “AV” button or by select-
ing in source menu from the main menu.
While in AV mode, you can also switch your
TV to TV or other AV modes by selecting in
source menu from the main menu.
In main menu, firstly use “ ” or “ ” button
then use “ ” / “ ” or “MODE” button to enter
Source menu. In source menu, move the
cursor by “ ” or “ ” button and then press
“MODE” button or “ ” or “ ” buttons when
the cursor is on the required item. The se-
lected mode comes automatically on the
screen.
9
$9
$9
$9
69, '(2
3&
HQX

Other Features

TV Status

Programme Number, Programme Name
(or AV), (they are displayed on the upper left
of the screen) and Sleep Timer (shows the
time left on the upper right screen if en-
abled). The sound indicator and picture
mode are displayed with them too. They are
displayed after programme change during 3
seconds.
à Ã
Programme Number
SÃ Ã
Programme Name (4 characters)
These OSD’s are displayed when a new
programme is entered by digit button or by
pressing “ ”, “P-”, “P+”, “TV”, “AV” button.

Programme Swap (

This button is used to reenter to the preced-
ing entered programme again. Pressing
" " consecutively allows to swap into two
last entered programmes.

Double-digit (- -)

This OSD is displayed when the "Double-
Digit" button pressed in place of the pro-
gramme number indicator.
After then, in order to enter a programme it
must be pressed to two digit consecutively.
When it is late to press any digit button this
function will be ignored and the display will
be erased. In the same way it must not be
late to press any digit button after entering
the first digit. The limit of the delay time is 3
seconds.
- 51 -
)
ÃÃ