Megasat HD 900 Twin CI plus Bedienungsanleitung Seite 22

4. Installation and Operation
2. Satellite List
This window shows the pre-stored satel-
lite list, in this menu, you can Add, Edit,
Delete, Satellites.
RED: Add
Add satellite by using the GREEN button.
Here you can input new Satellite angle,
Satellite Longitude, and press Yellow (OK)
button to confirm the setting and this
new satellite will be added to the end of
the Satellite list.
GREEN: Edit
Select the satellite then press RED but-
ton. You can change the satellite's name,
and Longitude.
BLUE: Delete
You can delete the user's satellite. Select
the satellite that you want to delete from
the satellite list. You will be asked to con-
firm whether delete the satellite or not. If
you press ok key, all the channels in the
selected satellite and transponder will be
deleted, and the selected satellite will di-
sappear.
YELLOW: Rename
With the yellow key, you can rename the
satellite name.
ENGLISH
14
4. Installation and Operation
3. Antenna setup
In this menu, user can set up DISH settings,
and choose correct parameters are import-
ant to have correct receiving ability..
Tuner
Select the desired LNB.
Satellit
Select the satellites of each LNB.
LNB Frequenz
Here you need to check the LNB frequency
according to your antenna, set the correct
frequency or define yourself, and keep LNB
power to be 13/18V.
Transponder
Displays the available transponders of the
selected satellite.
C: DiSEqC1.0 & DiSEqC1.1
If you connect antenna to DiSEqC Switch,
you need to specify the DiSEqC input to
which your selected satellite have been
configured.
ENGLISH
15