First Time Installation - Sharp LC-22DV510E Bedienungsanleitung

• To cancel an already set recording, highlight that
programme and press the OK button and select
the option "Delete Rec. Timer". The recording will
be cancelled.
Note: You cannot switch to any other channel or
source while there is an active recording on the
current channel.
Set Timer / Delete Timer
After you have selected a programme in EPG menu,
press the OK button and and Options screen will
be displayed. Select "Set Timer on Event" option
and press OK button. You can set a timer for future
programmes.
To cancel an already set reminder, highlight that
programme and press the OK button. Then select
"Delete Timer" option. The timer will be cancelled.
Note: It is not possible to record or set timer for two or
more individual events at the same time interval.

First Time Installation

IMPORTANT: Ensure that the aerial or cable is
connected before switching on the TV for the fi rst
time installation.
• When the TV is operated for the fi rst time, installation
wizard will guide you through the process. First,
language selection screen will be displayed:
• Use " " or " " buttons to select your language
and press OK button to set selected language and
continue.
• After selecting the language, "
be displayed, requiring you to set Country,Teletext
Language and Scan Encrypted options.
A01_MB60_[GB]_(01-TV)_1910UK_IDTV_TC_PVR_BRONZE17_22942LED_YPBPR_ROCKER_10072633_50186845.indd 16 A01_MB60_[GB]_(01-TV)_1910UK_IDTV_TC_PVR_BRONZE17_22942LED_YPBPR_ROCKER_10072633_50186845.indd 16 17.08.2011 14:43:50
• By pressing "
you want to set and press " " button to highlight
Teletext Language option. Use " " or " " button
to select desired Teletext Language.
• Press "
option. Scan Encrypted will be then highlighted.
You can set Scan Encrypted as Yes if you want to
scan coded stations.Afterwards select the desired
Teletext Language.
• Press
and the following message will be displayed on the
screen:
To select the "Yes" or "No" option, highlight the item by
using " " or " " buttons and press OK button.
Afterwards, the following OSD will be displayed on
the screen:
If you select CABLE option, the following screen will
be displayed:
Welcome!" screen will
You can select frequency ranges from this screen. For
highlighting lines you see, use " " or " " button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When fi nished, press OK button to start
automatic search.
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
English - 16 -
" or " " button, select the country
" button after setting Teletext Language
OK button on the remote control to continue
17.08.2011 14:43:50