Lupine Piko 4 Bedienungsanleitung Seite 12

Helmet Mount
No tools are required for mounting this lamp. The helmet mount is already mounted to the lighthead.
You can attach this helmet light to almost any kind of helmet with ventilation openings.
With the provided extension, the battery may
be carried in your jersey or backpack. The velcro
strap also provides the possibility to mount the
battery directly on the helmet.
22 Piko
First attach the thin velcro with the Lupine logo
to one side of the helmetmount.
Then pull the other end of the velcro through the
ventilation openings available on your helmet and fi x
it on the other side of the helmetmount.
Direct the light into a straight forward position and
tighten the velcro to avoid slipping of the lighthead
during use.
To ensure fl awless functionality, both screws must To ensure fl awless functionality, both screws must
be tightened sturdy. The lamphead can be adjusted be tightened sturdy. The lamphead can be adjusted
stepless 60° in vertical.
With the provided extension, the battery
may be carried in your backpack, a pocket
etc.
The FastClick backpart of Piko X 4 can be
replaced by a cable guide backpart.
Headband Mount
The FastClick battery have to be attached
to the FastClick mount on the headband
with the cable looking downwards.
Matching Batteries:
Art.No. 884 2.0 Ah
Art.No. 881 2.0 Ah Smartcore
Art.No. 835 3.3 Ah
Art.No. 842 3.3 Ah Smartcore
Piko Piko 23 23