Overview of the main menu
System settings
05_CTV732_GB 57
Slide control
In many menus you will fi nd slide controls to adjust e.g. the volume or the bright-
ness of the screen. The slide control is used as follows:
1. Select with the ENTER-button.
2. Move the control with the Cursor Buttons ( / ).
3. Confi rm the entry with the ENTER-button.
General Setup (1)
Audio Setup Page (2)
Dolby Digital Settings (3)
Preference Page (4)
Password Setup Page (5)
DVB-T Settings (6)
NOTE:
Some of the menu settings are only available in stop mode (depending on
the DVD).
TV Display
Here you can adapt the output of the DVD-Player to the TV-aspect.
Concerning the background: If you do not have a wide screen TV the TV-aspect
will be 4:3. However, most feature fi lms have an aspect of 16:9, the image is
therefore too wide for the TV-screen.
Here you can specify how the replay of the fi lm is to be adapted to the playback
device:
4:3 Panscan: You will only see the middle section of the fi lm. The borders will
be cut off.
4:3 Letterbox: You will see the complete width of the fi lm. The fi lm is thus
reduced in size, whereby black bars appear below and above the fi lm
16:9 Wide: Select this option if you use a wide screen TV for replay. Please
note that fi lms, that have been recorded with TV-aspect 4:3 can still be
replayed using aspect 4:3. This means, that replaying this fi lm will not require
the complete wide screen area of the television.
Wide Squeeze: Select this option if you use a wide screen TV for replay.
This setting is used to adapt fi lms in 4:3 format to the aspect ratio of the
widescreen television set. (Preferred setting for the built-in screen.)
NOTE: The setting „4:3 Panscan" is not supported by all DVDs.
57
16.05.2007, 15:06:10 Uhr