Service Search - Octagon SF 908G HD - Difference Bedienungsanleitung

- Using USALS :
Dish Longitude : Enter the longitude position of the
antenna using the NUMERIC buttons.
Dish Latitude : Enter the latitude using the NUMERIC
buttons.
Go To : Press the OK button to rotate the dish to the
selected antenna position.
Positioner Command : To use various positioner commands,
press the OK button. Then, available positioner commands
will appear.
 Dish Setting : Press the OK button to move to Dish Setting menu directly.
 Service Search : Press the OK button to move to Service Search menu directly.

3.3 Service Search

 Auto Search Mode :
- Satellite : Press the OK button to select the target satellite
to be searched.
- Search Type : Select the search type.
- Network Search : You can select Off or On. When you select
'On', you can find more transponders using the home
network. As it refers to NIT during searching, if there is the
frequency information of other transponder, it searches the
other transponder besides the transponder that the user
inputs.
- Time Calibration : You can select 'Simple', 'Full' and 'Off' to get TDT(Time Data Table) from each TP
- Dish Setting : Press the OK button to move to Dish Setting menu directly.
- Positioner Setting : Press the OK button to move to the Positioner Setting menu directly.
- Start Search : Press the OK button to start search.
 Manual Search Mode :
- Satellite : Press the OK button to select the target satellite
for search.
- Frequency : Select the frequency from the list to search.
- Symbol rate : Enter the symbol rate using the NUMERIC
buttons.
- Polarity : Select the polarity. (Vertical/Horizontal)
- Search Type : Select the search type.
- Network Search : You can select Off or On. When you select
'On', you can find more transponders using the home
network. As it refers to NIT during searching, if there is the
frequency information of other transponder, it searches the other transponder besides the
transponder that the user inputs.
- Dish Setting : Press the OK button to move to the Dish Setting menu directly.
- Transmission : You can select 'DVB' and 'DVB-S2'
- Start Search : Press the OK button to start a search
40