Using Performances; Choosing Performances - Korg C-540 Bedienungsanleitung

Using performances > Choosing performances

Using performances

Performances are registrations of sound combinations. In-
stead of selecting single sounds, or a combination of sounds,
you simply select a performance. A performance then recalls
one or two sounds, each one with their own settings, plus the
memorized split point (if the sounds are in Split mode).
There are 30 performances (10 groups
group corresponds to one of the numbered sound select but-
tons (1 ~ 10). You can then choose one of the three banks in-
side the selected group by using the BANK button (more
details are on page 280).
Button
Bank 1
1 (PIANO 1) Split&Layr
2 (PIANO 2) Grand&Ride
3 (E.PIANO 1) Grand&Ebas
4 (E.PIANO 2) PnoStrings*

Choosing performances

Here is how to choose a performance.
Note: While in Performance mode, you cannot switch between
Single, Layer and Split modes. However, if you select a perfor-
mance with two sounds in Split, the SPLIT indicator will turn on.
1.
Press the PERFORMANCE button to enter Performance
mode. The indicator turns on, and the latest selected per-
formance is recalled.
Perf.01
Split&Layr
18
×
3 banks each). Each
Performance
Bank 2 Bank 3
Digital EP* Baroque*
PaddedTine* Harpsi-Ch*
R&B EPno* Harpsi-Org*
EP Choir* Church Mix*
4/4
120
Button
Bank 1
5 (HARPSI/CLAV) EGrand Pad*
6 (VIBES/GUITAR) Piano Pad*
7 (ORGAN1) Pno Choirs*
8 (ORGAN2) Pno Guitar*
9 (STRINGS/CHOIR) Piano BX3*
10 (BASS) DualManual
* Note: These performances, with sounds set in Layer mode, do
not use EPx effects.
** Note: Performance 30 (PnoExpDEMO) is designed to demon-
strate our "Piano eXperience" technology, by exaggerating the
amount of key-off/hammer return portion of the Grand Piano
sound; it is not intended to be a play-able timbre. Normally,
these additional Piano eXperience sounds are not perceived as
separate elements, but together with the other sample layers,
they are a vital part of the realism and the authentic piano tone.
2.
Use the sound selection buttons to select a different group
of performance.
1 2
6 7
3.
If needed, use the BANK button to select a different perfor-
mance inside the same group. There are three performanc-
es for each group of performances.
As an alternative, use the +/YES and -/NO buttons to
choose a different performance inside the selected group.
4.
Press the PERFORMANCE button again to exit Perfor-
mance mode. The previous sound or combination of
sounds will be recalled. The indicator will turn off.
Performance
Bank 2 Bank 3
EP&NoFret Guitar Pad*
Scat&Bass GrandPiano
Vibes&Bass BriteGrand
Bass&Guitr MelloGrand
Org&Bass 1 2 Pianists
Org&Bass 2 PnoEXp-
DEMO**
3 4 5
8 9 10