General System Information; Start-Up; Mounting - HomeMatic HmIP-DBB Montage- Und Bedienungsanleitung

5

General system information

This device is part of the Homematic IP smart home
system and works with the Homematic IP protocol. All
devices of the system can be configured comfortably
and individually with the user interface of the Central
Control Unit CCU3 or flexibly via the Homematic IP
smartphone app in connection with the Homematic IP
cloud. All available functions provided by the system
in combination with other components are described
in the Homematic IP Wired Installation Guide. All cur-
rent technical documents and updates are provided at
www.eQ-3.com.
6

Start-up

6.1

Mounting

Please read this entire section before starting to
install the device.
When selecting a mounting location and drilling
in the vicinity of switches or socket outlets, check
for electrical wires and power supply cables.
To install the doorbell button, proceed as follows:
• Select the desired mounting location (e.g. next to
the entrance door).
• Press the lug on the back side of the wall bracket
(A) slightly to the rear (using a flat-blade screw-
General system information
25