Specification - Gossen MetraWatt CP 30 Bedienungsanleitung

1_CP C
Operating Instructions
CP 30
3-349-600-37
CP 330
CP 1100
CP 1800
AC/DC current probe
Order Reference Order No.
CP 30 Z201B
CP 330 Z202B
CP 1100 Z203B
CP 1800 Z204A
Battery is included.
Thank you for buying this product. For safety reasons
and optimum use of this instrument read through the
operating instructions very carefully.
1. SAFETY
The following symbols appear on the products:
Do not dispose of this product as unsorted
municipal waste. Contact a qualified recycler for
.
disposal
Attention! Refer to Manual
2/5.13
Double/Reinforced Insulation
Application around and removal from
HAZARDOUS LIVE conductors is
permissible
Complies with the relevant European
Complies with the relevant European standards
standards.
Read the operating instructions completely
and carefully before placing your instrument
into service, and follow all instructions
contained therein.
To avoid electric shock:
• Use caution during installation and use of this
product; high voltages and currents may be present
in circuit under test.
• This product must be used only by qualified
personnel practising applicable safety precautions.
• Do not use product if damaged.
• Always ensure the probe is removed from any live
electrical circuit, before removing the battery cover.
• Do not hold the probe anywhere beyond the tactile
barrier see FIG 1, in order to avoid dangerous
contact with the conductor.
2. INTRODUCTION
The CP 30, CP 330, CP 1100 and CP 1800 AC/DC
current probe have been designed for reliable and
accurate, non-intrusive measurement of AC, DC and
complex waveform currents.
Using advanced Hall Effect technology the CP 30,
CP 330 and CP 1100 can measure currents accurately
up to 30 Amps (CP 30), up to 450A (CP 330), up to
1400A (CP 1100) and up to 1800A (CP 1800).
Measurement features include:
AC and DC current measurement
High accuracy
1mA / 50mA / 100 mA Resolution
Auto Power Off
These features make it a powerful tool for use in
inverters, switch mode power supplies, industrial
controllers and other applications requiring current
measurement and/or waveform analysis.

3. SPECIFICATION

3.1 Electrical data
(All accuracies stated at 23°C ± 1°C)
CP 30 (Z201B)
Measuring range .......................
Current Range ..........................
Resoution ..................................
Overload capacity (60s) ............
Basic accuracy (DC...300Hz) ...
Temperature Coefficient ...........
Frequency range .......................
CP 330 (Z202B)
Measuring range .......................
Current Ranges.........................
Resoution ..................................
Overload capacity (60s) ............
Basic accuracy (DC...300Hz) ... ±1% of rdg ±50/100mA
Frequency range .......................
CP 1100 (Z203B)
Measuring range .......................
Current Ranges.........................
Resoution ..................................
Overload capacity (60s) ............
Basic accuracy (DC...300Hz) ... ±1% of rdg ±100/500mA
Frequency range .......................
CP 1800 (Z2034A)
Measuring range .......................
Current Ranges.........................
Resoution ..................................
Overload capacity (60s) ............
Basic accuracy (DC...300Hz) ... ±1% of rdg ±100/500mA
Frequency range .......................
3-349-600-37 2/5.13
3.2 General data
Overall DC accuracy ..................
Working voltage .........................
Operating temperature ..............
Storage temperature with
battery removed .........................
Power supply .............................
...................................................
...................................................
Battery life ..................................
Output connection: ....................
safety connectors
Conductor size ...........................
...................................................
Weight ........................................
Dimensions (H, W, D) ................
CP 1100, CP 1800 .....................
0 to 30A DC or ACpk
30A
1mA
500A
±1% of rdg ±2mA
±0.01% of reading/°C
DC to 20kHz (-1dB)
0 to 450A DC or ACpk
30A / 300A
10mA / 100mA
600A
DC to 20kHz (-3dB)
0 to 1400A DC, ACpk
100A / 1000A
100mA / 500mA
2000A
DC to 20kHz (-3dB)
0 to 1800A DC, ACpk
125A / 1250A
100mA / 500mA
2000A
DC to 20kHz (-3dB)
±1% of rdg
300V ACRMS or DC
0°C to +50°C
-20°C to +85°C
9 V Alkaline battery
PP3, MN 1604
or IEC6LR61
30 hours (typical)
1.5m cable with 4mm
25 mm diameter
32 mm (CP 1100)
320 g
194 x 74 x 25mm
200 x 74 x 25mm