Nat; Https - Abus IPCB42501 Bedienungsanleitung

Enable SSL:
Interval/attached image:
Authentication/
User name/
Password:
Recipient/recipient address:

7.5.2.11 NAT

Enable port mapping:
Mapping type:
Manual:

7.5.2.12 HTTPS

Activate HTTPS:
Create a self-signed certificate:
Install a signed certificate:
enable if the email server uses SSL or TLS. The SMTP port may
have to be changed.
Choose an image interval for attached images. /Option must be
enabled for attached images.
Enable this option if the SMTP email server requires
authentication. Enter the user name and password and confirm the
password for the account for sending email.
Enter the email recipients with name and email addresses
(max. 3 recipients) here.
The NAT (Network Address Translation) or port mapping function
automatically sets up port forwarding for access from the Internet
to the camera in the router (if the router supports this).
Auto: automatic assignment of all ports
manual assignment of all ports
enables the HTTPS function. This enables a secure
connection with connection certificate. Please note that
further steps are necessary for configuring the HTTPS
function.
enter all of the details required for the certificate. When
accessing the camera at a later point, the connection
must also be confirmed in the browser.
install a HTTPS certificate from an external provider.
When accessing the camera at a later point, the
connection is automatically accepted as secure (address
bar shows green).
96