Power Craft GSS 230 AE Gebrauchsanweisung Seite 21

INSTRUCTION MANUAL
Use
Load the nails required and set the depth as
described above.
Grip the handle (4), place the gun on the item so
that the safety switch (1) is depressed and press
the trigger (3) to fire a nail. Release the trigger.
Do not press the gun too hard.
Remove the battery after use. Store in the
transport case (11) when not in use.
ENGLISH
Clearing jammed nails
If a nail becomes jammed, it can be removed as
follows:
1. Remove the plastic guard.
2. Remove the two bolts using the Allen key
(13).
3. Remove the plate covering the safety
mechanism.
4. Loosen the depth setting button to release the
safety mechanism pin.
Remove the nail using pliers.
Reassemble the nail gun in reverse order.
21