Troubleshooting - Sony LT10A Serie Bedienungsanleitung

11. Troubleshooting

When the unit does not work properly, check the following before calling Sony Manufacturing Systems Corporation
Representative for service
The power cannot
be turned on.
Value is flashing
is displayed (Alarm)
Channel display is
(Alarm)
Fifth digit is "F"
LT10A / LT11A Series
• Turn off the power and turn it on 1 minute later.
• Check the connection and continuity of the power line.
• Check for the proper range of power voltage.
• Reset the unit after moving the measuring unit at least 1 mm.
• Has the measuring unit's cable been disconnected?
• Has the maximum response speed for the measuring unit been exceeded?
• Perform resetting operation.
• First carry out the reset procedure.
• Was the measuring unit exchanged with the power on?
• Is the measuring unit's connector locked?
• Is the measuring unit's cable disconnected?
• Connect a correctly functioning measuring unit and reset.
• Is the preset value too large (Overflow)?
45
(E)