JVC KD-G821 Bedienungsanleitung Seite 42

Symptoms
• Download does not seem to finish.
• Animation does not move.
• The display graphic function does
not work correctly.
• You cannot select an image or
animation for "Set" in "Pict."
("Default" cannot be changed for
"Movie" and "Picture, " or beeps
sound for "Slideshow.")
• The iPod or D. player does not turn
on or does not work.
• Buttons do not work as intended.
• The sound is distorted.
• "Disconnect" appears on the display.
• Playback stops.
• No sound can be heard when
connecting an iPod nano.
• No sound can be heard.
• "Error 01" appears on the display
when connecting a D. player.
• "NO FILES" or "NO TRACK"
appears on the display.
• "Reset 01" – "Reset 07" appears on
the display.
• "Reset 08" appears on the display.
• The iPod's or D. player's controls do
not work after disconnecting from
this unit.
• "No DAB Signal" appears on the
display.
• "Reset 08" appears on the display.
• "Antenna Power NG" appears on the
display.
• The DAB tuner does not work at all.
42
Remedies/Causes
It takes quite a long time to download an
animation with many frames (see page 38).
Wait until the operating temperature resumes.
Select an image only after downloading the
appropriate files in memory.
• Check the connecting cable and its connection.
• Update the firmware version.
• Change the battery.
The functions of the buttons have been changed.
Press MODE before performing the operation.
Deactivate the equalizer either on the unit or the
iPod/D. player.
Check the connecting cable and its connection.
The headphones are disconnected during
playback. Restart the playback operation using
the control panel (see page 29).
Disconnect the headphones from the iPod nano.
Disconnect the adapter from the D. player. Then,
connect it again.
No tracks are stored. Import tracks to the iPod or
D. player.
Disconnect the adapter from both the unit and
iPod/D. player. Then, connect it again.
Check the connection between the adapter and
this unit.
Reset the iPod or D. player.
Move to an area with stronger signals.
Connect this unit and the DAB tuner correctly
and reset the unit (see page 2).
Check the cords and connections.
Reconnect this unit and the DAB tuner correctly
and reset the unit (see page 2).