Horizontal Position - Sharp LL-S201A Installationsanleitung

nMounting the monitor on the stand
1. Place the stand on a level surface.
2. Set the monitor on the stand.
Set the monitor so that the logo in the center is aligned with
the circle mark on the stand.
TIPS
• The stand and the monitor can be secured with fixing
screws.
Fixing screws (supplied)
Pen writing position
Place the monitor at an angle on a table or other level surface.
1. Hold the flap by the depression on the back of the
monitor and pull the flap up.
2. Place the monitor where you want to use it.
Logo
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the flap.

Horizontal position

Circle mark
Place the monitor on a table or other level surface.
Caution
• When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.
2. Place the monitor where you want to use it.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the tabs.
Depression
7
E