IP address
Subnet mask
Gateway
address
MAC address
* The item contents will be cleared if you select the "Clear" button on the selected
item and press [Enter] on the remote control.
Enter the IP address assigned to the projector.
Numbers between 0-255 can be input for each of the fields of
the address. However, the following IP addresses cannot be
used. 0.0.0.0, 127.x.x.x, 224.0.0.0-255.255.255.255 (where x
is a number between 0-255)
Enter the subnet mask for the projector.
Numbers between 0-255 can be input for each of the fields of
the address. However, the following subnet masks cannot be
used. 1. x.x.x-254.x.x.x, 255.255.255.255 (where x is a
number between 0-255)
Enter the gateway IP address for this projector. Numbers
between 0-255 can be input for each of the fields of the
address. However, the following gateway addresses cannot
be used. 0.0.0.0, 127.x.x.x, 224.0.0.0-255.255.255.255
(where x is a number between 0-255)
Displays the LAN card MAC address.
49