Filling The Water Tank - Philips Avent SCF862/02 Bedienungsanleitung

Filling the water tank

Caution
• Before using the jar to measure water, please rinse the jar and make
sure it is clean.
• Before using jar to measure water, ensure the blade unit including
the blade shaft seal is assembled correctly. The flat side of the blade
shaft seal should face upwards (fig.
Note
• Ensure the water in the tank does not exceed 180 ml. The water level
indication can be found on the blending jar.
• We recommend using soft or purified water, as the minerals in mineral
water or tap water may cause limescale buildup to occur more quickly
inside the water tank.
• Except for using white vinegar for descaling, never put any liquids
other than water in the water tank.
1
Push the handle of the steaming and blending jar backwards to
remove it from the main unit (fig.
volume according to the "Ingredients and steaming time" chapter in
the user manual (fig.
2
Turn the water tank lid counterclockwise to open it (fig.
with water using the blending jar (fig.
180 ml (fig. ).
d
3
Put the water tank lid back on and turn the lid clockwise to lock it
securely in place (fig.
Note
• Always make sure that you have locked the water tank lid before the
appliance starts operating.
).
x
). Fill with water to the right
b
).
d
). Do not exceed the MAX
f
).
g
ENGLISH
13
), then fill
e