WolfVision VZ-9plus 3 Bedienungsanleitung Seite 18

Saving Visualizer Settings onto a USB-Stick
The Visualizer offers the opportunity to save menu settings and preset settings onto a USB stick (USB
storage device) as an XML file.
Change the settings to the desired values and store it on the USB stick (in the on-screen menu, Advanced
Settings / USB Stick Settings).
When you connect the USB stick with the prepared XML-file, an on-screen message will pop-up.
As soon as the USB-stick is removed, the previous settings are restored.
The settings of the Visualizer can be changed in the on-screen menu (see page 16).
External WolfVision Lightboxes (optional)
Connect the power cord of the WolfVision lightbox to the lightbox connector (#26) on the back of the
Visualizer. The LIGHT key (#4) of the Visualizer can now be used to switch between the light of the
Visualizer and the light of the WolfVision lightbox.
Touching the LIGHT key twice to activate the light box.
When using a lightbox with a separate power supply be sure that the light of the Visualizer is switched off to
prevent reflections.
Dimensions
working position:
closed:
13 1/8"
333
16 1/8"
408
Technical Specifications are Subject to Change!
17