Accessories - ECOLAB MULTRONIC Bedienungsanleitung

8

Accessories

417101804_Anhang03_pH.doc
pH Measuring Module
Item/designation
pH single-rod measurement chains
with screw-in thread PG 13,5 and plug-in screw
connection, glass shaft = 120 mm, Ø = 12 mm, collector
Ag/AgCI, sintered.
Multro-Tex pH-combination electrode
with dirt-repelling PTFE-circular diaphragm,
Polytex-gel-electrolyte core, electrolyte-refill is not
required.
pH range:
Temperature range:
Pressure:
Min. conductivity:
Multro-Tex pH-combination electrode with integrated
Pt 100 temperature sensor
tech. data as pH single rod measuring chain Multro-Tex
Note: 5- core cable required
Multro-Gel pH-combination electrode
for process engineering and application in media with
conductivity values > 100 µS/cm
with 3 ceramic diaphragms,
gel-filling, no electrolyte-refill required.
pH range:
Temperature range:
Pressure:
Min. conductivity:
Multro-Gel pH-combination electrode
up to 130 °C
for process engineering and application in media with
conductivity values ≥ 100μS/cm with ceramic diaphragm,
gel-filling, no electrolyte-refill required.
pH range:
Temperature range:
Pressure:
Min. conductivity:
Temperature sensor Pt 100
with PG 13,5 screw-in thread and screw connection
glass shaft Ø = 12 mm, L = 120 mm
Temperature up to 100°C
0..12
-15°C..+80°C
up to 6 bar
100uS/cm
0..12
-15°C..+80°C
up to 3 bar
100uS/cm
1..14
+10°C..+130°C
up to 3 bar
100uS/cm
- 54 -
Material-No.
418853008
on request
418853011
418853016
418853004
Rev.: 07-07/10