Pabx Access Code; Receiving Volume; Using The Alarm Feature - Topcom orbit Bedienungsanleitung

Personalise the handset

7.10 PABX Access code

It is possible to use your telephone with a prefix number. When dialling from the call list
or phonebook, this prefix will be dialled automatically before the number.
When dialling manually a number, this prefix will not be dialled but has to be
entered manually.

7.11 Receiving Volume

This sets the standard volume level for the handset earpiece.

7.12 Using the alarm feature

You can have different alarm setting for each handset registered to your base. The alarm
rings only at the handset, not at the base or any other handset. When an alarm is set, the
icon will appear on the top of the display.
Set the alarm
If the alarm is set on daily or Mon-Fri the
30
1 Enter the menu.
2 Select "Settings".
3 Select "Set Handset".
4 Select "PABX Access Code".
5 Select "Set code".
6 Enter the prefix code, e.g. '0' (1 digit only) and select "Save".
OR
7 Select "On" or "Off".
8 Return to standby.
1 Enter the menu.
2 Select "Settings".
3 Select "Set Handset".
4 Select "Receiving volume".
5 Select the desired volume (1-8) and confirm.
6 Return to standby.
1 Enter the menu.
2 Select "Clock & Alarm".
3 Select "Alarm".
4 Select "On".
5 Select "Once", "On daily", or "Mon to Fri" and confirm.
If you have selected "Once", "On daily" or "Mon to Fri", the display
will show:
Enter Time:
00:00
6 To deactivate the alarm, select "Off" and confirm.
7 Press "Back" to go to the previous menu.
icon will remain on the screen.