Activate/Deactivate Handsfree Function; Transferring A Call To Another Handset; Setting The Speaker Volume - Topcom butler 4056C Bedienungsanleitung

Butler 4056/4056C
• 'INT' and the number of the handset calling, appear on the display. The Call
symbol blinks on the display.
• Press the Line key
• During the call, 'INT', the handset number of the caller and the symbol
display. The call timer starts running.
• After finishing your call, press the Line key
4.3.3 Receiving an external call during an internal call
If you receive an external call during an internal call, you will hear a call waiting tone (double
beep) on both handsets being used for an internal call.
• Press the Line key
• After finishing your call, press the Line key

4.4 ACTIVATE/DEACTIVATE HANDSFREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are
talking, press the Up/Handsfree key
Press the same button to deactivate the handsfree function.
Note : When you are calling in handsfree mode and you want to change the
volume, press the Volume
Attention !! When you use the handsfree function for a long time, the batteries
will be empty quickly !

4.5 TRANSFERRING A CALL TO ANOTHER HANDSET

• You have an external caller on the line.
• Press the INT key
• The external call is now on hold.
• 'INT' appears on the display.
• Dial the number of the handset to which you would like to transfer the call.
• If the handset dialled is answered, you can have an internal conversation. Press the Line
key and the external call is transferred.
• If the handset dialled is not answered, press the Down key
caller again.
4.6 OUT OF RANGE WARNING
If the handset is out of range of the base unit, a warning signal will sound.
• 'SEARCHING' appears on the display and the symbol
• Move closer to the base unit.
• As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.

4.7 SETTING THE SPEAKER VOLUME

Use the Volume/Ringer key
select from 5 levels. The telephone is set to level '3' by default.
During a call, you can change the volume:
Butler 4056/4056C
to accept the internal call.
twice to accept the external call.
/ to activate the handsfree function.
button .
twice.
/ to set the volume of the speaker (handset). You can
to hang up.
to hang up.
to speak to the external
blinks on the display.
appear on the
11