If Your Handset Is Another Model; Removing A Handset; Setting Up A Handset On Another Base; Selecting A Base - Topcom Cocoon 450 Bedienungsanleitung

ENGLISH

6.1.2. If your handset is another model

After starting the registration procedure on the base, refer to the handset manual to find out how
to register the handset. The handset must be GAP compatible.
The icon and the text "NOT REG" flashes on the display when the handset is not associated
with the base.
When a handset is associated with a base, it is attributed a handset number by the base. It is the
number displayed on the handset behind the name and must be used for internal calls.

6.2. REMOVING A HANDSET

You can remove a handset from a base to allow another handset to be registered:
1. Enter the menu by pressing MENU.
2. Select BASE.
3. Press OK.
4. Select PIN PROT.
5. PRESS OK.
6. Enter PIN-code (0000).
7. Press OK.
8. Select DEL HS.
9. Press OK.
10. Select the handset to be cancelled.
11. Press OK to validate.
12. CONFIRM will appear. Press OK again to confirm or
Note: A double bleep confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.

6.3. SETTING UP A HANDSET ON ANOTHER BASE

You wish to use a Cocoon 450 handset with a base of another model. The base must be GAP
compatible.
1. To put the base in registration mode, refer to the base user manual.
2. Carry out operations 3 to 9 from paragraph "6.1. Setting up an additional handset".
Each handset attributes a number from 1 to 4 the base it is associated with. By default this
number is 1.

6.4. SELECTING A BASE

The handsets can be registered to up to 4 bases simultaneously.
To change the base, select "B SELECT" in the menu. Select the base option:
AUTO: To choose the best base
FIXED: Choose a particular base. The handset will not search for another
base when going out of range.
PREFER: Start with searching a particular base first and then the others whengoing out of
range.
And press OK.
When selecting FIXED or PREFER, the display shows 'BS1 2 3 4'. The current registered base
will blink. Press 1-4 to select the base.
If you select 'AUTO' the handset will automatically search for another base when you are out of
range!
23
to return.
Cocoon 450