Herunterladen Inhalt Inhalt Diese Seite drucken

Receiving An External Call During An Internal Call; Activate/Deactivate Handsfree Function; Transferring A Call To Another Handset; Out Of Range Warning - Topcom Cocoon 300 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cocoon 300
• Press the Line key
• During the call, 'INT', the handset number of the caller and the symbol
display. The call timer starts running.
• After finishing your call, press the Line key
base unit.

4.4.3 Receiving an external call during an internal call

If you receive an external call during an internal call, you will hear a call waiting tone (double beep)
on both handsets being used for an internal call.
• Press the Line key
• After finishing your call, press the Line key
base unit.

4.5 Activate/deactivate handsfree function

This function allows you to communicate without having to pick up the handset. When you are
on the phone, press the Up/Handsfree key
Press the same button to deactivate the handsfree function.
Note : When you are calling in handsfree mode and you want to change the volume, press the Volume
button
.
Attention !! When you use the handsfree function for a long time, the batteries will be empty quickly !

4.6 Transferring a call to another handset

• You have an external caller on the line.
• Press the Programming key
• 'INTERCOM' appears on the display.
• Press the Programming key
• The external call is now on hold.
• 'INT' appears on the display.
• Dial the number of the handset to which you would like to transfer the call.
• If the handset dialled is answered, you can have an internal conversation. Press the Line key
and the external call is transferred.
• If the handset dialled is not answered, press the Down key
again.

4.7 Out of Range Warning

If the handset is out of range of the base unit, a warning signal will sound.
• 'SEARCHING' appears on the display and the symbol
• Move closer to the base unit.
• As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.

4.8 Setting the speaker volume

Use the Volume/Ringer key
from 5 levels. The telephone is set to level '3' by default.
to accept the internal call.
twice to accept the external call.
/
.
.
/
to set the volume of the speaker (handset). You can choose
59
59
59
59
59
59
59
to hang up or put the handset back on the
to hang up or put the handset back on the
to activate the handsfree function.
to speak to the external caller
blinks on the display.
appear on the

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis