Setting The Date And Time; The Call List; Calling A Number From The Call List - Topcom Butler 3055 Bedienungsanleitung

Butler 3055

5.1. Setting the date and time

When you receive an incoming call and the date and time are not sent together with the
telephone number, this means that the date and the time will not be shown on the display. By
setting the date and time, they will be shown on the display, together with the telephone
number, every time a call comes in !
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'DATE/TIME' appears on the display.
• Press the Programming key
• When 'YEAR' appears on the display, enter the 2 last numbers of the year (00=2000,
01=2001, ...) and press the Programming key
• When 'MONTH' appears on the display, enter the month (01=January, 02=February, ...) and
press the Programming key
• When 'DAY' appears on the display, enter the day of the month and press the Programming
key to confirm.
• When 'HOUR' appears on the display, enter the current hour (in 24h format) and press the
Programming key
• When 'MINUTES' appears on the display, enter the minutes and press the Programming key
to confirm.
The date and time are now set !

5.2 The Call List

The calls received are stored in the Call List (max. 30 numbers).
• Briefly press the Up key
• The name of the most recent caller appears on the display. If no name is available, 'NO
NAME' appears on the display.
• If it is a private number, 'UNAVAL' appears on the display.
• The date and time the call was received are linked to each call.
• Briefly press the Down key
• Briefly press the Down key
Notes :
•
If neither the Up or Down key
•
After a call is received, the number of the caller remains on the display for 15 seconds after the last ring.
•
Caller ID is not available while you are on the line.

5.3 Calling a number from the Call List

• Press the Up key to go to the Call List
• Press the Up key to look up the desired call. Press the Down key
number.
• Once the number is on the display, press the Line key
(The symbols and 'EXT' appear on the display and the call timer starts.)
.
a few times until 'SETTING' appears on the display.
.
again.
to confirm.
to confirm.
to view the most recent call.
to view the telephone number of the call.
to browse other numbers on the list.
is pressed for 15 seconds, the telephone will return to standby mode.
26 26 26 26 26 26 26 26 26 26 26 26 26
to confirm.
to view the telephone
and the number is dialled automatically.