Intended Use; Technical Data - Bosch GHE Professional 60 T Betriebsanleitung

OBJ_BUCH-2419-003.book Page 12 Thursday, February 11, 2016 9:51 AM
12 | English
 Examine the machine and replace worn or damaged parts
for safety.
 Grease the blade cassette with a multi purpose grease con-
taining high viscosity mineral oil every 70 hours through
the correct lubrication point. See figure 7 of illustrations.
 Use lubrication spray directly on the blade after every use.
 Keep all nuts, bolts and screws tight to ensure that the
hedgecutter is always in a safe working condition.
Cleaning
 Always clean the machine after each use. Clean exterior
surfaces thoroughly using a soft brush and cloth. Do not
clean with water, solvents or polishes.
Recommendations for Optimal Handling of the
Battery and Charger
 Warning! Do not attempt to charge non rechargeable bat-
teries with the charger.
 Inserting the battery pack into the machine with the switch
on is dangerous.
 Ensure battery is the right way up.
 Insert the battery until the locking mechanism clicks. To re-
move the battery, operate locking lever. Take care not to
drop the battery through the hole.
 For care use and maintenance please use charger and bat-
tery manuals which are supplied with the products or avail-
able at www.bosch-professional.com.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.

Technical Data

Cordless hedge trimmer
Blade type
Article number
No-load stroke rate
Cutting length
Tooth opening
Tooth pitch
Handle Rotation
Sharpening Angle
Weight (without batteries)
according to EPTA-Procedure 01:2014
Serial number
Only LI-Ion batteries GBA 36V series (Art No. 1 607 A35 .../ ...) and battery charger AL36100 CV series (Art No. 1 600 A001..)
can be used with this machine.
Please do not use non-rechargeable batteries with this appliance, only those specified by the manufacturer.
F 016 L81 090 | (11.2.16)
Symbol Meaning
Read instruction manual.
Wear protective gloves.
Wear foot protection.
Oiling required
Movement direction
Reaction direction
Switching On
Switching Off
Accessories
Weight

Intended Use

The garden product is intended for Professional use.
GHE 60 R
roughing
3 600 J12 000 3 600 J12 001
-1
min 3000
mm 600
mm 28
mm 35
° +90/0/-90
° 45
kg 5.0
See serial number (type plate) on the machine
GHE 60 T GHE 70 R
trimming roughing
3 600 J12 002
3000 3000
600 700
23 28
30 35
+90/0/-90 +90/0/-90
45 45
5.0 5.3
Bosch Power Tools