Herunterladen Inhalt Inhalt Diese Seite drucken

Unpacking; Installation Site; Safety - Leica DMLB Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Installation and safety
Unpacking, documents
Please compare the delivery carefully with the
packing note, delivery note or invoice. We
strongly recommend that you keep a copy of
these documents with the manual, so that you
have information on the time and scope of
delivery later when ordering more equipment or
when the microscope is serviced. Make sure
that no small parts are left in the packing
material. Some of our packing material has
symbols
indicating
recycling.
!
Attention:
When taking the microscope out of its packing
and putting it onto the desk, take care not to
damage the sensitive vibration-damping feet on
the bottom of the microscope.
Attention:
On no account should you connect the
microscope and peripherals to the mains yet
→ p. 9 (mains voltage) and p. 52 (incident
light only).

Installation site

!
Attention:
Make sure that the workplace is free from oil
and chemical fumes. Vibrations, direct sunlight
and major temperature fluctuations have a
negative
effect
photomicrography. A stable desk of optimum
height (70 – 80 cm) is important. This and an
8
environment-friendly
on
measurements
ergonomically designed chair which can be
adjusted in several positions are the external
prerequisities for fatigue-free microscopy.

Safety

To guarantee that the microscope and
accessories are in a perfectly safe condition,
please note the following advice and
warnings: The mains plug must only be
inserted into a grounded outlet. If an
extension cord is used, it must be grounded
as well. Using the ground connection (1.7),
any
accessories
microscope which have their own and/or a
different power supply can be given the same
ground conductor potential. Please consult
our servicing personnel if you intend to
connect units without a ground conductor.
The instruments and accessories described
in this manual have been safety-tested and
checked
for
modifying the instrument in any way or
combining it with non-Leica products not
dealt with in this manual, it is essential to
consult the Leica agency for your area or the
main factory in Wetzlar!
and
Attention:
connected
Attention:
possible
hazards.
to
the
Before

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

DmlmDmlp

Inhaltsverzeichnis