Description - Quicke Q 330 Betriebsanleitung

DESCRIPTION

Before operating your loader, please read this manual
carefully; failure to do so may jeopardize its efficient
running and could result in a breakdown.
Separate mounting instructions are supplied with
subframes, valves and hydraulic connections, which are
dependent on the tractor model used.
This loader is quick-coupled to the System US subfra-
mes, which are available for a large number of tractor
models (and sizes), from various manufacturers.
A subframe kit (Illus. 1) contains all the parts needed to
attach the loader to the tractor, as well as grill guards*
(A). The subframe sets are of different types, e.g. with
or without* extensions (B) to the tractor rear axle.
1
2
ENGLISH (102:03)
The loader could be connected to the tractor hydraulics
with the aid of a hydraulic set, Illus. 2, that contains a
control valve with MONO Handle Device and necessary
connections, or with the aid of a hose set, Illus.3, to be
connected to the original valves of the tractor. In those
cases where a hose set is mounted, the tractor shall be
equipped with two double acting valves.
The loader can, if required, be equipped with Electrical
valves for further hydraulic connections.
* Depending on tractor- and loader model.
3
102