8. Additional functions
8.1 Slide show variations
8.2 Causes of errors and error rectification
The following table can be used to localise and rectify minor errors with the device:
Error
Display is blank
Device turns off
No image appears
NOTE
• Contact our customer service department if the problem remains after taking the steps
detailed above.
Possible cause
Device is switched off
Power supply adapter not
connected correctly
No mains power
Device is faulty
By static electricity, such as
occur during normal daily use
(carpet, wool sweater), it may
happen that the device will
go into Standby Mode.
No storage medium is
inserted
The storage medium does
not contain data
Solution
Switch on the device.
Ensure that the power supply
adapter is plugged in and
connected to the device.
Check your fuse box.
Inform our customer service
department.
In case that the device shouldn´t react
on any commands or show a black
screen, reset the device by pressing the
POWER button on the remote control
or on the backpanel of the device.
Insert a storage medium.
Check your storage medium.
GB
16