Adjusting Exposure Format (Zoom Size); Cordless Remote Mode (Remote) - Metz MECABLITZ 58 AF-2 Pentax Bedienungsanleitung

7.5 Adjusting exposure format (Zoom Size)

With some digital cameras it is possible to adjust the light angle of the main
reflector to suit the chip format (the dimensions of the image recording module).
• When „Size ON" appears, Zoom Size is activated.
The reflector position display is adjusted to the image format of the digital
cameras.
• When „Size OFF" appears, Zoom Size is deactivated.
The display of the reflector position is shown in small picture format (24 x 36).
Setting procedure:
• Press the
Zoom Ext
Select
appears on the display.
Zoom Size
• Select the menu option „ZoomSize" by pressing the
m/ft
and
Set
highlighted.
• Confirm the selection of the special function by pres-
sing the
• Select the desired setting with the
Size ON
keys. The setting takes effect immediately.
• Press the button
Set
reset to its normal view. If the button
sed, the display is automatically reset to its normal
view after about 5 seconds.
P TTL F 5.0
SZoom 35
SZoom
10 m ISO 200
Refer to your camera's instruction manual for further information.
button repeatedly until „Select"
Sel
keys. The selected menu option will be
button.
Set
and
repeatedly until the screen is
is not pres-
Once the Zoom Size mode is activated,
„SZoom" will appear on the display next to
the focal length.

7.6 Cordless remote mode (Remote)

• When „Remote OFF" appears, the cordless remote mode is deactivated.
• When „Remote Master" appears, the flash unit is operating as a guiding
master flash unit on the camera.
• When „Remote Slave" appears, the flash unit is operating completely as a sla-
ve flash unit. See also Section 19.
Setting procedure:
• Press the button repeatedly until „Select"
Sel
appears on the display.
• Select the „Remote" menu option by pressing the
and keys. The selected menu option will be
highlighted.
• Confirm the selection of the special function by pres-
sing the button.
Set
• Select the desired setting with the
keys. The setting takes effect immediately.
• Press the button repeatedly until the screen is
reset to its normal view. If the button
sed, the display is automatically reset to its normal
view after about 5 seconds.
BEEP
Select
Remote
FB
Set
Remote
Master
and
Set
CH1
P
TTL
is not pres-
Master
AZoom 35
F32
Para Sel
125