eng
Important Safety Instructions
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take
special note of all warnings listed in these instructions and on the unit.
1. Ventilation
The unit should be situated so that its location or position does not interfere with its
proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar
surface that may block the ventilation openings. The ventilation should not be impeded
by covering the ventilation openings with items, such as newspapers, table-cloths,
curtains, etc. Also, it should not be placed in a built-in installation, such as a bookcase
or cabinet, which may impede the flow of air through the ventilation openings.
2. Heat & Flame
The unit should be situated away from heat sources such as radiators, heat registers,
stoves or other appliances (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
3. Cleaning
The unit should be cleaned only as recommended. See the section "Care and
Maintenance" of this manual for cleaning instructions.
4. Attachments
Do not use attachments no recommended by the product manufacturer.
5. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The unit has been dropped or the enclosure damaged.
B.The unit exhibits a marked change in performance or does not operate normally.
6. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such asa m onth or
longer, take out the battery from the unit to prevent damage or corrosion.
7. Servicing
The user should not attempt to service the unit beyond those methods described
in the user's operating instructions. Service methods not covered in the operating
instructions should be referred to qualified service personnel.
2
Features
Thank you for purchasing the WATERPROOF FM RADIO WITH USB/SD/MMC SLOT.
This model incorporates following features :
Water proof design for you to enjoy music in bath-tub or swimming pool
Playback MP3 song stored in USB and SD/MMC memory device
PLL FM radio with 20 preset channels
Clock with LCD display
Installation
A battery compartment located at inner cabinet of the unit.
(1) Wipe the unit with a soft cloth to remove any water drop , if the unit has been
played in the water.
(2) To open the unit , grip the lower housing and turn it counterclockwise.
(3) Release the inner battery cover lock and open it.
Clock setting battery back-up
(4) For clock setting backup, follow the polarity diagram shown inside the compartment
and install a CR2032 lithium battery into the clock back-up battery slot. If the unit is
at the first time usage, just remove the plastic insulation tag from the battery slot
(battery included).
Radio operation battery
(5) For radio operation , follow the polarity diagram shown inside the compartment and
install 6 pieces of 1.5V "AA" size (UM-3) battery (purchase separately) into the
battery compartment.
Note: If the "low-battery" indicator
displays, the unit may operate abnormally.
You need to replace the used battery by the fresh one.
WARNING:
- Be sure that the batteries are installed correctly. Wrong polarity may damage the unit
and void the warranty.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Only batteries of the same or equivalent type as recommend are to be used.
- If the unit is not be used for an extended period of time, remove the battery.
- Do not dispose of batteries in fire, batteries may explode or leak.
USB flash drive and SD/MMC card installation
(6) Insert the USB flash drive stored with MP3 file into the USB connector.
Or, insert the SD/MMC card stored with MP3 file into the SD card slot.
(7) Close the inner battery cover and lock it.
(8) To close the unit, grip the lower housing and turn it clockwise until it locks tight
with the upper housing.
3
eng