Bluetooth Pairing; Turning On Bluetooth Audio - Marmitek BoomBoom 380 Gebrauchsanleitung

BLUETOOTH PAIRING

1. Make sure the BoomBoom 380 is switched off.
2. Turn on the BoomBoom 380 by pressing the POWER button and
keep the button pressed. The Indicator LED will first turn Blue, then
Green and then flashing Blue/Green. Now release the POWER
button.
3. Turn on a device that supports Bluetooth, such as an iPod, iPhone,
Android or MP3 player and go to: Settings > General > Bluetooth.
Click ON 'Bluetooth' and the BoomBoom 380 will appear on the
device. Click on 'BoomBoom 380'. The device is now connected and
paired with the speaker. If the device prompts for a pairing code,
enter:"0000".
4. When the Speaker and Bluetooth Source Device are successfully
paired up, the LED will slowly flash Blue.

TURNING ON BLUETOOTH AUDIO

1. Make sure the Bluetooth Source Device (e.g. Mobile Phone) to which
the Speaker is paired up is switched on.
2. Make sure the BoomBoom 380 is switched on. This can be done by
pressing the Power Button once. The LED will first turn Blue, then
flashing green and when a connection is made, it will slowly flash
Blue.
3. If your device does not connect automatically, go to the device's
Bluetooth settings and select the BoomBoom 380. A connection will
then be made.
4. Play Music from the Bluetooth Source Device, and adjust Master
Volume to the middle position.
5. Music should be heard from the Speaker. Adjust the Volume from the
Speaker to desired level by pressing
6. If the Volume Intensity from the Speaker is too weak, adjust the
Master Volume from the Bluetooth Source Device accordingly.
7. To switch off the Speaker, simply press the Power button once again.
8
and .
© MARMITEK