Operation - Bartscher 200054 Bedienungsanleitung

5.3 Operation

•
Priori to the first use, rinse the device with warm water and mild detergent.
Next, rinse with clean water and dry.
•
Next, fill the water tank with drinking water (up to „MAX" level).
CAUTION!
In order to shorten the water heating stage, use hot water.
This helps save time and power!
WARNING! Risk of scalding!
Do not overfill the device! Overfilling the water tank may cause a leak of hot
water and scalding!
•
Place the cover on the water tank and turn clockwise to close the tank.
•
Connect the device to appropriate power supply source.
CAUTION!
Drinking water must always be in the tank before it is disconnected.
Do not fill the tank with such liquids as acids, lye, oils or nitrates!
•
Turn on the device with the ON/OFF switch.
•
Set the temperature with the temperature control.
•
The red, heating function light will light up. Water will be heated up to the set
temperature.
•
Once the set water temperature is achieved, the red operating control lamp turns off.
Next, the green control lamp for maintaining hot water lights up, showing
temperature maintenance mode.
WARNING! Risk of scalding!
Do not lift the cover during boiling. The released steam can scald hands, arms
and face!
- 24 -