Returning The Device - bürkert 8718 Schnellstartanleitung

13.2. storing
note!
Incorrect storage may damage the device.
• Drain device prior to prolonged operating pauses!
• Store the device in a dry and dust-free location!
• Storage temperature: -10 – +70 °C.
english
60
No work or tests will be carried out on the
device until there is a valid Contamination
Declaration.
The Contamination Declaration can be down-
loaded from our Homepage or requested from
Bürkert Ingelfingen.
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
E-mail: info@de.buerkert.com
www.burkert.com
Operating Instructions
contamination
english
62
Documentation
Type Declaration on
14.

reTurninG The device

To return a device already in use, you will
require an authorization number!
If you would like to return a device already in use to
Bürkert, proceed as follows:
→
Complete the Contamination Declaration included with
the original documents.
→
Send the declaration to the address indicated on the
form.
Bürkert will fax or e-mail you an authorization number to
return the device.
→
Pack the device in consideration of the information in
Chapter 13.1. Packing, Transporting.
→
Return the device to Bürkert quoting this authorization
number and the Contamination Declaration.
Address:
Bürkert Fluid Control Systems
Corporate Quality / Complaint Management
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 599
Fax + 49 (0) 7940 - 10 91 490
E-mail: service.international@burkert.com
15. disPosal
→
Dispose of the device and packaging in an environmentally
friendly manner.
note!
Damage to the environment caused by device com-
ponents contaminated with fluids.
• Observe applicable disposal and environmental
regulations.
Observe national waste disposal regulations.
Type 8708, 8709, 8718, 8719
english
61
english
63