Setting The Volume; Selecting The Chime; Troubleshooting - Silvercrest HG01910 - IAN 280620 Montageanleitung Und Bedienungsanleitung

Operation
Using the signal type selector button
is to be indicated optically or acoustically or both optically and
acoustically.

Setting the volume

Press the volume button
are a total of 4 possible volume settings: very loud, loud, medium, soft.

Selecting the chime

Note: The doorbell has 36 different chimes.
Press the melody selection button
Press the melody selection button
audible signal.
Repeat this process until you have selected your desired audible signal.
The last-selected audible signal is automatically stored.

Troubleshooting

After the influence of extraordinary environmental conditions (e.g. a strong
electromagnetical field) the function of the item may be affected. In this
case, please take off the batteries of both appliances for approximately
2 minutes. Then proceed again as described in the section "Synchronising
the transmitter / receiver".
28 GB/IE
, select whether the signal
5
until the desired volume is reached. There
3
. The first audible signal sounds.
4
again to move on to the next
4