Cleaning The Motor Protection Filter - Philips FC8140 Bedienungsanleitung

17 Close the cover ('click').
Note: You cannot close the cover if the dust container has not been placed.
Cleaning the HEPA exhaust filter
To maintain optimal performance, clean the HEPA exhaust filter each time
you empty the dust container.
1 To open the HEPA exhaust filter grille, grab the tabs and pull the
grille upwards to remove it from the appliance.
2 Remove the HEPA exhaust filter.
3 Rinse the pleated side of the HEPA exhaust filter under a hot slow-
running tap as described in steps 11 and 13 of section 'Emptying
the dust container' above.
4 Place the dry HEPA exhaust filter back into the appliance.
5 To close the HEPA exhaust filter grille, first align the lugs on the top
of the grille with the slots in the appliance (1). Then press the tabs
downwards until the grille locks into place (2) ('click').

Cleaning the motor protection filter

To maintain optimal performance, clean the motor protection filter at least
once a year.
1 Lift the dust container out of the appliance by its handle.
2 Pull the filter holder with the motor protection filter out of the
appliance.
3 Take the motor protection filter out of the holder. Shake the motor
protection filter over a dustbin to clean it.
4 Put the filter in the filter holder and slide the filter holder back into
the appliance.
5 Put the dust container back into the appliance.
English
15