Subscribing A Handset To A Base Station - Topcom Butler 575 plus Bedienungsanleitung

Butler 575 plus
If you want to subscribe this handset to base unit 2
again, select de base unit "BASE NO: 2" and
press the OK button. Display :"NEW BASE:2"
Note : If the handset was never subscribed to
base station 2, the following is displayed :
"NOT SUB2".
• On the display "BASE : 2" is shown.
• Press the OK button to subscribe the new base
s t a t i o n .
• The unit returns to idle mode, "MULTI 2" appears
on the display.

5.3 Subscribing a handset to a base station

To be able to make and receive telephone calls, the handset must be subscribed to
the base unit. A new handset can only be subscribed to the base unit when the
base unit is in subscription mode. Press and hold the Paging button for 15 secs until
you hear a beep tone. The base unit is now in subscription mode.
• Press the Function button until "H-REGISTER"
appears on the display.
• Press the OK button.
• On the display "SEARCH BS 1" is shown.
• Press the Function button.
• The base number changes from 1 to 4.
• As soon as the handset has found the correct
base number, press the OK button.
• When the handset is looking for the base unit,
the RFPI Code is displayed.
• Press the OK button.
• When "PIN : " is displayed, enter the PIN code of
the base unit.
• After entering the 4 digit PIN code, press the
OK button.
• The unit returns to the "H-REGISTER" menu.
NEW BASE: 2
NOT SUB2
BASE: 2
H--REGISTER
SEARCH BS 1
00004--00 :AB
PIN:
PIN: ++++
H--REGISTER
60 60
MULTI 2