Overview Of The Components - Clatronic bs 1236 Bedienungsanleitung

5....-05-BS 1236
GB
1 Suction power regula-
tor
2 Opener for front panel
3 Front panel
4 Ventilation slits
5 Floor brush height
adjustment
6 Floor brush
7 Handle
8 Suction hose
9 Cable take-up
10 On/off switch
• Remove the motor and the accessories from the box. Take off any packaging
materials that may be present.
• Assemble the handle. See illustration B.
• Attach the hose and the accessories to the device. See illustration A.
Initial and General Use of the Device
Adjusting the Height of the Floor Nozzle
Select a setting (see illustration C):
• Unwind the required cable length and insert the mains plug into a standard 230
Volt, 50 Hertz wall socket.
• Place your foot on the unlocking button (16) to move the handle into the requi-
red position (b or c). See illustration E.
• Switch the device on with the on/off switch (10).
• Adjust the suction power with the suction power regulator (1).
40
05.03.2004

Overview of the Components

11 Carrying handle
12 Suction tubes (acces-
sories)
13 Crevice nozzle (acces-
sory)
14 Brush nozzle (acces-
sory)
15 Main device
16 Unlocking button
17 Hose connection
18 Opener
19 Lid of dust container
Assembly
Carpet with high pile
Carpet with medium pile
Carpet with low pile
Smooth floor
10:41 Uhr Seite 40
20 Motor protection filter
21 Foam material filter
22 Dust container
23 Pre-filter
24 Button for dust contai-
ner
25 Safety filter catch
26 Cleaning brush
27 Handle of dust contai-
ner
28+29 Exhaust filters (see
illustration J)