General Safety Instructions For Power Tools - Parkside PMFS 200 B2 Originalbetriebsanleitung

Symbols on the Equipment:
Warning!
Risk of electric shock!
Disconnect from the mains before
carrying out maintenance and re-
pair work.
Injury hazard caused by rotating
tool! Keep hands away.
Read through the instruction manual
carefully.
Wear ear protection.
Wear eye protection.
Wear breathing protection.
Wear hand protection.
Protection class II
Electrical appliances must not be
disposed of with the domestic
waste.
General safety instructions
for power tools
WARNING! Read all safety
directions and instructions.
Omissions in the compliance with
safety directions and instructions
can cause electrical shock, fire
and/or severe injuries.
Retain all safety directions and in-
structions for future use.
The term „power tool" in the warnings re-
fers to your mains-operated (corded) power
tool or battery-operated (cordless) power
tool.
1) WORK AREA SAFETY
• Keep work area clean and well
lit. Cluttered or dark areas invite ac-
cidents.
• Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools
create sparks which may ignite the dust
or fumes.
• Keep children and bystanders
away while operating a power
tool. Distractions can cause you to
lose control.
2) ELECTRICAL SAFETY
• Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools. Unmodi-
fied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed
or grounded surfaces, such as
GB IE NI
7