Linksys WAP54G Installationsanleitung Seite 4

F
Make sure the Access Point's
Power, Act, and Link LEDs are lit.
If they are not, check the
cable connections. Click Next.
G
The Setup Wizard will search for
the Access Point within your
network and display a list of all
access points. If more than
one are displayed, select the
Access Point by clicking on it.
Then click Yes to change its
settings.
H
You will be asked to sign onto
the Access Point you have
selected. Enter the default
password, admin. Then click
Enter.
I
Enter a descriptive name in the
Device Name field and then
create a new password.
If your network router will
automatically assign an IP
address to the Access Point,
then select Automatic-DHCP .
If you want to assign a fixed IP
address to the Access Point,
then select Static IP . Enter an IP
Address, Subnet Mask, and the
IP address of your network
gateway (usually your router).
Then click Next.
4
F
G
I
H