Inhaltsverzeichnis
Werbung
Allgemeiner Teil / General Section
MULTIPLE ROOM OPERATION
Installing additional remote contols
INSTALL
1
SPEAKERS
REPLACE SPEAKERS
RC
BACK
INSTALL
1
INSERT BATTERIES
IN THE NEW RC.
MULTIPLE ROOM OPERATION
Replacing loudspeakers on the HiFi
INSTALL
SPEAKERS
REPLACE SPEAKERS
RC
BACK
REPLACE SPEAKERS
SELECT ROOM: 1
BACK
+
-
1 - 18
________________________________________________
Switching on a pair of loudspeakers
1
Press the »CONTROL« button on the remote control.
2
From the »
« menu, select the »
CONTROL
sing »A« and then »OK« to confirm.
3
From the »
« menu, select the »
SELECT ROOM
»A« or »S« and then »OK« to confirm.
4
Switch on the loudspeakers using the »
If you are using several pairs of loudspeakers you can also install additional
remote control units. These enable you to operate pairs of loudspeakers in diffe-
rent rooms, regardless of where the HiFi is located.
1
Switch on the HiFi and all the loudspeakers.
2
Press the »CONTROL« button on the first remote control.
– The »
« menu appears.
CONTROL
3
From the »
« menu, select the »
CONTROL
»A« and then »OK« to confirm.
4
From the »
« menu, select the »
INSTALL
then »OK« to confirm.
– The remote control display reads: »
«.
NEW RC.
5
Insert three batteries (3 x 1.5 V alkaline, LR6/AA/AM3) in the battery com-
partment of the second remote control, making sure that the polarity is cor-
rect.
– The second remote control is now ready for operation.
________________________________________________
If you replace a pair of loudspeakers, you must install the new pair on the
HiFi system in the same manner.
1
Press the »CONTROL« button on the remote control.
– The »
« menu appears.
CONTROL
2
From the »
« menu, select the »
CONTROL
»A« or »S« and then »OK« to confirm.
3
From the »
« menu, select the »
INSTALL
pressing »A« or »S« and then »OK« to confirm.
4
Press » +« or »
« to select the room containing the pair of loudspeakers
–
which were replaced, and then press »OK« to confirm.
5
Switch on the left loudspeaker of the new pair using the
– The remote control display reads: »
in the
»POWER
« lights up, which means that the remote control and the
HiFi have detected the left loudspeaker.
6
Switch on the right loudspeaker of the new pair using the
ton.
– The remote control display reads: »
indicator in the
»POWER
« lights up, which means that the remote control
and the HiFi have detected the right loudspeaker.
Hint:
If the message »
ALL SETS ON
repeat the process from Step
1
onwards.
« item by pres-
SELECT ROOM
« item by pressing
ROOM 2
« button.
y
y
VOLUME
x
x
« item by pressing
INSTALL
« item by pressing »A« and
RC
INSERT BATTERIES IN THE
« item by pressing
INSTALL
« item by
REPLACE SPEAKER
»POWER
« button.
« and the orange indicator
RCD LS1
»POWER
« but-
« and the orange
RCD LS1 LS 2
« does not appear,
RCD LS1 LS 2
RCD 2000
GRUNDIG Service
Werbung
Inhaltsverzeichnis
