Inhaltsverzeichnis
Werbung
RCD 2000
MULTIPLE ROOM OPERATION
Special features of multiple room mode
Installing additional pairs of loudspeakers
CONTROL
AUDIO CHANNEL
INSTALL
INSTALL
1
SPEAKERS
REPLACE SPEAKERS
INSTALL
1
ALL SPEAKERS ON
LS1
INSTALL
1
ALL SPEAKERS ON
LS1 LS2
MULTIPLE ROOM OPERATION
INSTALL
1
SELECT LEFT LS
AND PRESS OK
INSTALL
1
CONFIRM RIGHT LS
WITH OK
INSTALL
1
READY
TUNER
87.50 MHz
MENU
INFO
MEMO
GRUNDIG Service
You can operate up to five additional pairs of loudspeakers – distributed in dif-
ferent rooms – with the HiFi system.
If you do not want to carry the remote control from room to room in order to set
the volume and tone for the individual pairs of loudspeakers, you have the opti-
on of using more than one remote control unit to operate the HiFi and the louds-
peakers.
1
Press the »CONTROL« button on the remote control.
– The »
« menu appears.
CONTROL
2
From the »
CONTROL
« menu, select the »
»A« and then »OK« to confirm.
– The »
« menu appears.
INSTALL
3
In the »
« menu select »
INSTALL
SPEAKERS
4
Switch on the left loudspeaker of the second pair using the
ton.
– The remote control display reads: »
»POWER
« button lights up, which means that the remote control and the
HiFi have detected the left loudspeaker.
5
Switch on the right loudspeaker of the second pair using the
button.
– The remote control display reads: »
in the
»POWER
« button lights up, which means that the remote control
and the HiFi have detected the right loudspeaker.
________________________________________________
6
Press »OK« to confirm the setting.
– The remote control display reads: »
OK
«, the orange indicator in the
»POWER
ker flashes and the orange indicator in the
loudspeaker lights up continuously.
Note:
If you want to use the left loudspeaker as a right loudspeaker, press »+«
once. The orange indicator on the selected loudspeaker flashes.
From the second pair of loudspeakers onwards, the remote control display
also shows the number of the room containing the pair of loudspeakers you
can operate with it.
7
Press »OK« to confirm the setting.
– The remote control display reads: »
the orange indicator in the
»POWER
lights up continuously and the orange indicator in the
on the right loudspeaker flashes.
8
Press »OK« to confirm the setting.
– The remote control display reads: »
»POWER
« buttons on the loudspeakers light continuously.
9
Press »OK« to confirm the setting.
– The remote control display reads: »
– Both loudspeakers are switched on automatically and the green indicators
in the
»POWER
« buttons light up continuously.
Note:
If the loudspeakers are not switched on automatically, switch them on using
the remote control menu as described in the next section.
_____________________
INSTALL
« item by pressing
« by pressing »OK«.
»POWER
« but-
« and the orange indicator in the
LS1
»POWER
«
« and the orange indicator
LS1 LS 2
SELECT LEFT LS AND PRESS
« button on the left loudspea-
»POWER
« button on the right
«,
CONFIRM RIGHT LS WITH OK
« button on the left loudspeaker
»POWER
« button
«, the orange indicators in both
READY
«.
TUNER 87.50 MHz
Allgemeiner Teil / General Section
1 - 17
Werbung
Inhaltsverzeichnis
