Yamaha RY9 Bedienungsanleitung Seite 101

MIDI Transmission
MIDI Transmission Block Diagram
<MIDI Transmission Condition>
NOTE ON/OFF 9nH
PITCH BEND CHANGE EnH
BULK DUMP F0H, F7H
SONG SELECT F3H
TIMING CLOCK F8H
START FAH
CONTINUE FBH
STOP FCH
ACTIVE SENSING FEH
<SW1> Transmit Channel
<SW2> Transmit Channel
<SW3> Transmit in Song Select Mode
<SW4> Transmit Internal synchronization
Transmission Data
1. System Real-time Message
TIMING CLOCK 11111000 (F8H)
START 11111010 (FAH)
CONTINUE 11111011 (FBH)
STOP 11111100 (FCH)
ACTIVE SENSING 11111110 (FEH)
2. Channel Message
1) NOTE ON/OFF
STATUS 1001nnnn (9nH)
NOTE NUMBER 0kkkkkkk
0vvvvvvv
00000000
2) PITCH BEND CHANGE
STATUS 1110nnnn (EnH)
LSB 0lllllll
MSB 0hhhhhhh
<SW1>
MIDI OUT
<SW2>
<SW3>
<SW4>
n=0~15 VOICE CHANNEL NUMBER
k=0(C-2)~127(G8)
NOTE ON v=1~127
NOTE OFF
n=0~15 EXTERNAL IN/HARMONY
CHANNEL NUMBER
l=0~127
h=0~127
3. System Common Message
1) SONG SELECT
STATUS 11110011
SONG NUMBER 00ssssss
Song Select transmission occurs when in Song Select Mode.
4. System Exclusive Message
Bulk data transmission occurs in System Mode MIDI Bulk Dump function.
1) BULK DUMP
The data is the same as that for reception. The contents regarding
transmission, see "System Exclusive Message" in the previous page.
93
(F3H)
s=0~99